|
|
#1 (permalink) |
|
Admin
Join Date: Dec 2001
Location: Gorham Me
Posts: 243
|
My new system....
Here is my new system that i built on my own over the holidays. Next step is to have a little fun overclocking to see what I can get out of it.
Specs: Full tower case with 7 fans Abit KR7a_RAID AMD XP1600+ 1 GB pc2100 DDR RAM (2) Maxtor ATA133 40GB Drives in RAID 0 config [NTFS] (1) IBM Deskstar ATA100 45GB Drive [FAT32] ATI All-in-Wonder Radeon w/32mb Creative Labs Sound Blaster LIVE 5.1 Platinum Linksys 10/100 LAN Water cooling system with products from Dangerden, Blizzard, and pcmods.com Pcmods.com cathode ray, plexi window, and fan controller Here are some pics: -JRW |
|
|
|
|
|
#2 (permalink) |
|
Registered
Join Date: Oct 2001
Location: PA
Posts: 1,465
|
So is your reservior lined at all. I am curious to see how it does if it isn't. There is alot of talk about not mixing copper and aluminum in the same cooling system due to it becoming a battery. Keep us posted on how it does.
|
|
|
|
|
|
#3 (permalink) |
|
Admin
Join Date: Dec 2001
Location: Gorham Me
Posts: 243
|
Thats a good question... i'm not sure if it is lined. As for the batter effect, water isn't a very good conductor of electricity so it shouldn't be a problem. So far, the system has been flawless. I was able to take the FSB up to 150 with all the voltages maxed giving me an extra 200Mhz. My temps stay fairly low even with all my case fans turned off all night long.
-JRW |
|
|
|
|
|
#4 (permalink) |
|
Registered User
Join Date: Feb 2002
Location: New Joisey
Posts: 110
|
That looks like a nice system you got. I especially like the window with the water cooling. Although I am curious, I am using a copper heatsink/fan. My AthlonXP 1600+ chip runs at about 120F at Full Load. What is yours on full load, and what chip do you use?
__________________
signatures are stupid so I am not going to have one. |
|
|
|
|
|
#5 (permalink) | |
|
Admin
Join Date: Dec 2001
Location: Gorham Me
Posts: 243
|
Quote:
My dorm room is very hot and the back of the case is right near the radiator so its not the best situation. Temps: High / Low / AVG system - 36 / 21 / 31 proc - 32 / 54 / 45 This is in degrees C and displayed using MotherBoardMonitor4. I plan to use artic silver in the near future on both blocks which may help a slight bit. -JRW |
|
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|