Epox 8kha+ help !

john80y · 02-16-2002, 02:16 PM

I installed a dsl modem in my pc for a little while ... The thing conflicted with something so I removed it ....

Anyway ....

On boot up the temperature and volatages don't show up .. The temps look like this 0 / 32 degrees ... The volatages are all on 0.

The only thing that works is the cpu fan speed ... How do I get this back working again ?

**NUTNDUN** · 02-16-2002, 03:03 PM

Hey John,
Did you try clearing the cmos yet. If not give that a try. How old is the mobo?

john80y · 02-16-2002, 03:10 PM

The motherboard is one week old ... Will try cmos now !

john80y · 02-16-2002, 03:22 PM

Ok cleared the cmos (had to look up jumper settings) I replaced jumper as it was and booted up ... I then got a cmos error so I went into bios and chose default settings ... Booted up but stil no temperatures or voltages ... The fan speed is still there.

I installed mother board manager but get nothing on that either ..

Something is wrong somewhere ... The PC runs fine but without the temperature settings its gunna be tough to over clock !

**NUTNDUN** · 02-16-2002, 04:11 PM

Hey John,
If the motherboard is only one week old I would rma it and have them send ya a new one. If you wanna keep trying with this one you could always download motherboard monitor and see if that picks up on the temps. But if you can do without the pc for a little I would just rma it.

john80y · 02-16-2002, 04:20 PM

I can't do without a PC for a while ... I need it ... So I guess I'm stuck for now ... Can't understand it though ... Its been working fine for a week.

02-16-2002, 02:16 PM	#1 (permalink)
john80y Registered User Join Date: Jan 2002 Posts: 261	Epox 8kha+ help ! I installed a dsl modem in my pc for a little while ... The thing conflicted with something so I removed it .... Anyway .... On boot up the temperature and volatages don't show up .. The temps look like this 0 / 32 degrees ... The volatages are all on 0. The only thing that works is the cpu fan speed ... How do I get this back working again ?

02-16-2002, 03:03 PM	#2 (permalink)
NUTNDUN Registered Join Date: Oct 2001 Location: PA Posts: 1,465	Hey John, Did you try clearing the cmos yet. If not give that a try. How old is the mobo? __________________

02-16-2002, 04:11 PM	#5 (permalink)
NUTNDUN Registered Join Date: Oct 2001 Location: PA Posts: 1,465	Hey John, If the motherboard is only one week old I would rma it and have them send ya a new one. If you wanna keep trying with this one you could always download motherboard monitor and see if that picks up on the temps. But if you can do without the pc for a little I would just rma it. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-16-2002, 03:10 PM	#3 (permalink)
john80y Registered User Join Date: Jan 2002 Posts: 261	The motherboard is one week old ... Will try cmos now !

02-16-2002, 03:22 PM	#4 (permalink)
john80y Registered User Join Date: Jan 2002 Posts: 261	Ok cleared the cmos (had to look up jumper settings) I replaced jumper as it was and booted up ... I then got a cmos error so I went into bios and chose default settings ... Booted up but stil no temperatures or voltages ... The fan speed is still there. I installed mother board manager but get nothing on that either .. Something is wrong somewhere ... The PC runs fine but without the temperature settings its gunna be tough to over clock !

02-16-2002, 04:20 PM	#6 (permalink)
john80y Registered User Join Date: Jan 2002 Posts: 261	I can't do without a PC for a while ... I need it ... So I guess I'm stuck for now ... Can't understand it though ... Its been working fine for a week.