05-24-2003, 02:56 PM
|
#1 (permalink) |
|
x4841434B4552
Join Date: Nov 2002
Location: Strongbadia
Posts: 254
|
USB connections
Ok, I bought a new case, and it has connectors for a front usb port. the cable has the connectors on it and they read:
VCC USB+ USB- GND there is a spot on the motherboard with 4 pins labeled USB1 but it doesn't tell me where to put each connector... I have a PCChips M830L V3.1 motherboard and 215-4HL-S case. |
|
|
|
05-24-2003, 03:31 PM
|
#2 (permalink) |
|
PCTT Administrator
Join Date: Mar 2003
Location: Las Vegas
Posts: 3,735
|
check the manual for your MOBO it will show you where they should be connected. If you don't have the manual go to the manufacturers webpage and download the manual.
__________________
Vote For Us!!! 
|
|
|
|
|
05-24-2003, 04:39 PM
|
#3 (permalink) |
|
x4841434B4552
Join Date: Nov 2002
Location: Strongbadia
Posts: 254
|
problem
The manual isw FTP and I am behind a proxy server that does not allow FTP... so if you could download and attach it....
heres the link ftp://ftp.pcchips.com.tw/manual/m830/830s31b.zip |
|
|
|
|
05-24-2003, 10:35 PM
|
#5 (permalink) |
|
JUST4fun
Join Date: Apr 2002
Location: Birmingham, UK, Earth.
Posts: 948
|
FYI usb
Some usb kit, do not all ways work as it should, when connected to the front/ case usb ports, if you do get problems! try the main usb at the back, pc link /etc just don't seems to like em at the front
 found out the hard way, was just about to give up and bin the cable! 
Last edited by LO There!; 05-25-2003 at 12:46 AM. |
|
|
|
|
06-11-2003, 03:23 PM
|
#7 (permalink) |
|
Registered User
Join Date: Sep 2002
Posts: 1
|
Another USB Question:
I just finished my first home-built machine last night. The case,an Antec SX1080AMG, has front mounted USB ports, but the manual doesn't specify whether it will support USB 2.0. My motherboard, an Asus P4t533-c, has pins for both flavors of USB. For now I have them plugged into the USB 1.1 slot, but I haven't tested them yet. Anyone know if I can just plug the wire from the front ports into the USB 2.0 slot on the motherboard and have USB 2.0 on the front ports? |
|
|
|
|
06-11-2003, 03:30 PM
|
#8 (permalink) |
|
x4841434B4552
Join Date: Nov 2002
Location: Strongbadia
Posts: 254
|
I would assume you could hook them up because you can plug USB 1.1 devices into USB 2.0 slots and they will work
__________________
-----BEGIN GEEK CODE BLOCK----- Version: 3.12 GCS d- s+:-- a--- C++++ UL++ P+ L++ E W++ N-- o-- K- w++ O- M-- V- PS-- PE++ Y PGP t+ 5- X- R !tv b++ DI+++ D+ G e h !r z? ------END GEEK CODE BLOCK------ Decode Here Used to have a sig, but the friggin' sites don't allow remote linking... |
|
|
|
|
06-11-2003, 04:18 PM
|
#9 (permalink) | |
|
h3|P | 4m 5tUcK
Join Date: Jan 2003
Location: UVic
Posts: 1,898
|
Re: FYI usb
Quote:
lol i can laugh about it now...
__________________
|
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
